|
|
|
|
|
HOME |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Truck and Railcar Loading Arms Liquid Transfer Equipment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Truck and Railcar Loading Racks and Fall Protection Equipment
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Portable Truck and Railcar Access and Fall Protection Equipment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flatbed Truck Fall Protection Equipment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flatbed Tarping / Inspection Platforms |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Truck and Railcar Fall Arrest Equipment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Safe Access Equipment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Truck and Railcar Bulk Loading Spill Containment
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Marine Barge and Ship Access Stage Gangways |
|
|
|
|
|
|
|
|
|
|
|
|
|
Silea API Couplers - Female Coupler for Bottom Loading
|
|
Dry Break Couplers for Bottom Loading
|
|
API RP 1004 RP dry-break couplers for bottom loading
Silea couplers can be used in the petrochemical industry when dry coupling is required.
Manufactured according to the API RP 1004 standard regulations, are supplied with a 4” TTMA flange and are made of aluminium alloy. The surfaces subject to wear are hard coated. The standard fluoroelastomer (Viton®) seals are easily removable to allow maintenance operations. This type of coupling prevents spillage during the connection/disconnection operations and ensures safety conditions for the operators.
Female API RP 1004 dry break coupler,
model 513
The female dry break coupler SILEA 513 is full interlocked. It cannot be opened unless it is properly connected, and cannot be disconnected when the poppet is open. It contains two safety trigger and four interlock lugs for secure connection.
As consequence of the fact that it conforms to the API RP 1004 specifications, the SILEA 513 can also be used with the adaptors of other manufacturers.
Technical specifications
- Design pressure: 150PSI
- Test Pressure: 225PSI
- Operating Pressure: 40-75PSI
- Maximum connection pressure 100PSI
- Flow Rate: 660GPM
- Design Temperature: 0F to 150F
- 4” TTMA flanged
- Seals: Viton (in alternative Fluorosilicon rubber**)
**FLUOROSILICON compound is used for low temperature (up to -60°C) and a wide range of chemicals like petroleum-based fuel, oil and lubricants.
|
|
 |
|
|
|
|
|
|
|
|
|
Silea API Couplers - Male Coupler for Bottom Loading
|
|
Male API RP 1004 dry-break couplers
(adaptors), model 511 and 512
These two adaptors are utilized for the loading and unloading operation of movable tankers.
They are installed on the tank-trucks or tank wagons. In addition to allowing an easy coupling to the loading and unloading arms, they assure a coupling without any spillage
and the complete safety during the transferring process.
The adaptor 512 is equipped with a operating handle permitting the manual opening and closing of the valve, and a sightglass.
The adaptors are manufactured in an aluminium alloy.
The surfaces subject to wear are hard coated.
The standard seals are in fluoroelastomer (Viton®).
The items are 4” TTMA flanged.
While loading the tank-vehicle has to be connected to the vapor recovery unit to maintain the operating pressure within
the 0,5 bar |
|
 |
|
|
|
|
